matsukiyo CITRIC ACID POWDER 500G
Cleaning the inside of the dishwasher, cleaning stains caused by hot water in electric kettles, stains caused by cold water in washbasins, bathtubs, soap scum. Effectively reduces ammonia odors, unpleasant mold odors around the washbasin and fishy cooking odors.
Directions
● Used for electric kettle
① Fill with water until the water line is full, add citric acid (20g citric acid for 1L of water), dissolve and bring to a boil.
② Leave for about 1 hour, then pour out the hot water, pour in clean water and bring to a boil.
③ Confirm that it is in the heat holding state, empty the hot water and rinse it clean. At that time, just pour water with the water supply button, while rinsing from the warm mouth.
● For fully automatic dishwashers Pour 50g into the machine like a regular detergent and run a full cycle. This is not a dishwashing liquid, so when using it, do not leave dishes in the machine.
● Used to clean water residue, soap scum that has adhered to the sink, bathroom
① Dissolve 25g in 1L of hot water.
② Pour the dissolved solution into a spray bottle.
③ Spray on dirty worry part, scrub with brush or sponge then rinse with water. Depending on the material, there is a risk of corrosion, so it should not be left for a long time.
● For bathtub, marble, washbasin Sprinkle about 5g on a damp sponge and rub to remove stains.
● Use in the toilet (toilet, tank ...)
① Dissolve 25g in 1L of hot water.
② Pour the dissolved solution into a spray bottle.
③ Spray on stains such as urine stains, water residue, scrub with brush or sponge then rinse with water. Do not use directly for hot water faucet, hot air outlet, switch. Do not use on absorbent materials such as wood.
● For water outlet
① Sprinkle 90g~180g of commercially available baking soda into the drain.
② Dissolve 5g of this product in about 200ml of hot water (about 1 cup).
③ Slowly pour the dissolved citric acid solution into the drain.
④ After 30 minutes, wash it off.